#ALTERA QUARTUS II PROGRAMMER USER GUIDE HOW TO#

The reader should be familiar with the basic operation of the Altera Monitor Program including how to compile and load a program onto the DE2 board. This user guide assumes that you are familiar with the Nios II hardware and software development flow. The detailed examples in the tutorial were obtained using Quartus II version 8.0. The Altera Quartus II software is the most comprehensive environment available for system-on-a-programmable-chip (SOPC) design. The reader is expected to have access to a computer that has Quartus II software installed. Quartus_pgm -c -a - to display the list of devices connected to the cable This manual is designed for the novice Altera Quartus II design software user and provides an overview of the capabilities of the Quartus II software in programmable logic design. BASIC COMPUTER SYSTEM FOR THE ALTERA DE1 BOARD For Quartus II 8 2.2.2SRAM An SRAM Controller provides a 32-bit interface to the static RAM (SRAM) chip on the DE1 board. Quartus_pgm -l - to display the list of available hardware Quartus_pgm -c -m -o - If you want to use individual programming file(s)

#ALTERA QUARTUS II PROGRAMMER USER GUIDE SERIAL#

If Altera USB Blaster isn’t showed in Universal Serial Bus controllers, please check whether the Other devices has Unknown device. If yes, users can use Quartus programmer and download FPGA code. In the Quartus II window click the Programmer button on the Toolbar to open the Programmer window The Hardware Setup must be USB-Blaster USB-0. Image Source: DE2 Development and Education Board User Manual version 1.42, Altera Corperation, 2008 1-17 2. Quartus_pgm -c filname.cdf - If you want to use cdf file Check if the Universal Serial Bus controllers in the Windows Device Manager has an Altera USB Blaster. Make sure that the RUN/PROG Switch for JTAG/AS Modes is in the RUN position. If users would like to program their SRAM Object File (. Before configuring the FPGA, ensure that the Quartus II software and the USB-Blaster II driver are installed on the host computer. Make sure you specify a valid programming mode, programming cable, and operation for a given device. The Quartus II Programmer is used to configure the FPGA with a specific. The Programmer uses one of the valid supportedįile formats: Programmer Object Files (.pof), SRAM Object Files (.sof), Jam File (.jam), or Jam Byte-Code File (.jbc).

Altera quartus ii programmer user guide