best mouse for macbook pro 15 inch mid 2010

#BEST MOUSE FOR MACBOOK PRO 15 INCH MID 2010 SERIAL NUMBER#

When you remove the backlight, you have to see the metal surface of the keyboard.Ĭontinue separating the backlight from the keyboard. The backlight has three different layers. It is just way easier to work with a brand new part. When I have to replace a failed or damaged keyboard, I am always replacing the backlight too. You can be less careful, if you are not reusing the backlight.

You can secure the trackpad cable to the case with sticky tape so it stays away from the keyboard.Ī MacBook Pro keyboard has two parts – the keyboard itself and the backlight.Ĭarefully start separating the backlight from the keyboard. If your trackpad cable looks like mine, carefully unglue it from the keyboard. Do not lose it.ĭifferent MacBook Pro models have different trackpad cables. There is a round silver spring located under the power button. Un-route the power button from under the antenna and display cables. The ribbon cable is glued to the case with sticky tape. Lift up the power button and separate the ribbon cable from the case. Remove two screws securing the power button. In MacBook Pro the power button permanently attached to the keyboard via a ribbon cable.īefore you can remove the keyboard you will have to release the power button. When it looks like one on the following picture, you are ready for the keyboard removal and replacement. It is NOT necessary to remove the battery, hard drive and display panel. You’ll have to disassemble the laptop to the point where you have easy access to the keyboard, as it shown on the following picture.Īs I mentioned earlier, you will have to remove the logic board, cooling fans, optical drive and un-route some cables. It’s the most complete set of disassembly instructions. Search for the upper case removal or replacement guide. There are lots of different disassembly guides on that site. Now you can go to the iFixit site and find the correct disassembly guide. For example, it will say MacBook Pro (15-inch, Mid 2010).

#BEST MOUSE FOR MACBOOK PRO 15 INCH MID 2010 SERIAL NUMBER#

When you run the serial number you will find the model year in the results. Check your serial number on the Apple site.ģ. Search for the serial number printed on the bottom cover.Ģ. You have to know the model year of your MacBook Pro in order to find the correct disassembly guide.ġ. You can use iFixit MacBook Pro disassembly guides to remove these components. You will have to remove the optical drive. You will have to remove the logic board and cooling fans. Replacement keyboards for 17″ MacBook Pro laptop A1297 available here. Replacement keyboards for 15″ MacBook Pro laptops A1286 available here. Replacement keyboards for 13″ MacBook Pro laptops A1278 available here. You will need a set of fine Phillips and Torx screwdrivers. It means in order to replace the keyboard you will have to remove most internal components. In a MacBook Pro the keyboard is mounted to the bottom side of the top case assembly. In my case some liquid was spilled on the keyboard and some keyboard keys stopped working.

Best mouse for macbook pro 15 inch mid 2010